Siemens TC63 Command Set Download Page 237

Page: 237 / 501

TC63 AT Command Set

10.1 AT^SICS

TC63_ATC_V00.490

Page 237 of 501

5/24/05

Confidential / Draft - Do not copy

10.1

AT^SICS Internet Connection Setup Profile

AT^SICS

serves to create and edit Internet connection profiles. A connection profile can be assigned to one or

more service profiles defined with

AT^SISS

, and thus, determines which type of connection is to be established

when opening a service profile with

AT^SISO

The

AT^SICS

read command requests the current settings of all Internet connection profiles. One line is issued

for every possible parameter of a given

"conType" value.

The

AT^SICS

write command specifies all parameters of a connection profile identified by

At first the type of Internet connection needs to be selected via

value "conType". This deter-

mines the applicability of all other

values related to this "conType" and automatically sets their

defaults. An exception is the

<conParmValue-alphabet>

which can be set before or after selecting "con-

Type". To change the settings the write command needs to be executed for each single

All profile parameters set with

AT^SICS

are volatile. Therefore, the best practice is to use scripts and let the host

application handle the required AT commands.

Table 10.1:

Applicability of

AT^SICS

values

Syntax

value

CSD

GPRS0

"conType"

mandatory

"user"

optional

"passwd"

optional

"apn"

mandatory

"inactTO"

optional

"calledNum"

mandatory

"dataRate"

mandatory

"dataType"

mandatory

"authMode"

mandatory

"dns1"

optional

"dns2"

optional

"alphabet"

optional

Test Command

AT^SICS=?

Response(s)

Read Command

AT^SICS?

Response(s)

^SICS:

Write Command

AT^SICS=

Response(s)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 237 / 501

Search results

Summary of Contents for TC63

Reviews: