Siemens TC63 Command Set Download Page 354

Page: 354 / 501

TC63 AT Command Set

13.21 AT^SCMW

TC63_ATC_V00.490

Page 354 of 501

5/24/05

Confidential / Draft - Do not copy

13.21

AT^SCMW Write concatenated SMS messages to memory

Writing a concatenated message to the memory is similar to writing a "normal" message, except that each seg-

ment of the concatenated message must be identified by the additional parameters

<seq>

<ieia>

and

<ref>

To store all segments of the message one by one, the

AT^SCMW

write command must be executed for each seg-

ment.

Syntax

Command Description

The write commands transmits one segment of a concatenated SMS (either SMS-DELIVER or SMS-SUBMIT)

from TE to memory storage

<mem2>

. Memory location

<index>

of the stored message is returned. Message

status will be set to 'stored unsent' unless otherwise given in parameter

<stat>

Notes

• Command is only available if

AT+CMGF

=1.

• To send or delete a concatenated short message please use the known SMS commands, see

AT+CMSS

for

sending and

AT+CMGD

for deleting.

• See notes provided for

AT+CMGW

Test Command

AT^SCMW=?

Response(s)

Write Command

If text mode (see

AT+CMGF

=1)

AT^SCMW=

<oa>

<da>

, [

<tooa>

<toda>

][,

<stat>

<seq>

<max>

<ieia>

<ref>

<CR>

Text can be

entered.

<CTRL-Z>

<ESC>

Response(s)

^SCMW:

<index>

If writing fails

ERROR

+CMS ERROR

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

SIEMENS

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 354 / 501

Search results

Summary of Contents for TC63

Reviews: