Siemens TC63 Command Set Download Page 335

Page: 335 / 501

TC63 AT Command Set

13.9 AT+CMSS

TC63_ATC_V00.490

Page 335 of 501

5/24/05

Confidential / Draft - Do not copy

13.9

AT+CMSS Send SMS messages from storage

Syntax

Command Description

The write command sends message with location value

<index>

from message storage

<mem2>

to the network

(SMS-SUBMIT or SMS-COMMAND). If new recipient address

<da>

is given for SMS-SUBMIT, it shall be used

instead of the one stored with the message. Reference value

<mr>

is returned to the TE on successful message

delivery. Value can be used to identify message upon unsolicited delivery status report result code.

If the optional parameter

<da>

is given, the old status of the short message at

<index>

remains unchanged

(see

<stat>

Test Command

AT+CMSS=?

Response(s)

Write Command

If text mode (

AT+CMGF

=1):

AT+CMSS=

<index>

<da>

<toda>

]]

Response(s)

+CMSS:

<mr>

<scts>

]

If sending fails

ERROR

+CMS ERROR

Write Command

If PDU mode (

AT+CMGF

=0):

AT+CMSS=

<index>

<da>

<toda>

]]

Response(s)

+CMSS:

<mr>

]

If sending fails

ERROR

+CMS ERROR

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

GSM 07.05

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 335 / 501

Search results

Summary of Contents for TC63

Reviews: