Siemens TC63 Command Set Download Page 200

Page: 200 / 501

TC63 AT Command Set

8.11 AT^SALS

TC63_ATC_V00.490

Page 200 of 501

5/24/05

Confidential / Draft - Do not copy

8.11

AT^SALS Alternate Line Service

The

AT^SALS

command is designed to support Alternate Line Service. This allows the subscriber to use two

voice numbers on the same SIM card (service requires a dual line SIM card).

The write command enables or disables the presentation of

<view>

and specifies the

<line>

used for outgoing

calls. The read command returns the presentation mode of

<view>

and the currently selected

<line>

Syntax

Unsolicited Result Code

If switched on with

<view>

=1:

^SALS:

<line>

Indicates the line used by an incoming call.

Parameter Description

Controls the presentation mode of the URC "^SALS" which indicates the line number used by an incoming call:
0

(&F)(P)

Disables indication of the called line

Enables indication of the called line

Selects the line to be used for outgoing calls. Setting is global for the ME and non volatile.
1

(&F)(D)

ALS Line 1

ALS Line 2

Note

• If a non ALS SIM is inserted, the

<line>

will be reset to line 1.

Test Command

AT^SALS=?

Response(s)

^SALS:

(list of supported

<view>

s), (list of supported

<line>

Read Command

AT^SALS?

Response(s)

^SALS:

<view>

<line>

ERROR

Write Command

AT^SALS=

<view>

<line>

]

Response(s)

ERROR

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

SIEMENS

<view>

(num)

<line>

(num)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 200 / 501

Search results

Summary of Contents for TC63

Reviews: