Siemens TC63 Command Set Download Page 128

Page: 128 / 501

TC63 AT Command Set

5.7 AT^SPWD

TC63_ATC_V00.490

Page 128 of 501

5/24/05

Confidential / Draft - Do not copy

5.7

AT^SPWD Change Password

The

AT^SPWD

command comprises all functions of the

AT+CPWD

command. Apart from the different prefixes

"^SPWD" and "+CPWD", the major difference is that the

list of

AT^SPWD

includes the additional

"CM" password dedicated to the Customer SIM Lock. Set with the command

AT^SCSL

, this type of lock allows

the application manufacturer to lock a mobile to specific operators.

The Customer SIM Lock feature is designed to be configurable during the production of the mobile application.

Therefore, to program the "CM" password, the

AT^SPWD

write command can be used no matter whether the SIM

is inserted or PIN authentication has been done. Opposite to that, passwords for all other facilities can only be

edited if the SIM is present and PIN authentication completed.

IMPORTANT: Please note that, even though there is no need for a factory set Customer SIM Lock, you are

strongly advised to specify at least a "CM" password, avoiding that end users ever have a chance to activate this

lock type.

Each password is a string of digits the length of which varies with the associated facility. The test command

returns a list of pairs which represent the available facilities and the maximum length of the associated password.

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 128 / 501

Search results

Summary of Contents for TC63

Reviews: