Siemens TC63 Command Set Download Page 287

Page: 287 / 501

TC63 AT Command Set

11.9 AT+CGPADDR

TC63_ATC_V00.490

Page 287 of 501

5/24/05

Confidential / Draft - Do not copy

11.9

AT+CGPADDR Show PDP address

Syntax

Command Description

The test command returns a list of defined

<cid>

The write command returns a list of PDP addresses for the specified context identifiers. If no

<cid>

is specified,

the addresses for all defined contexts are returned.

Parameter Description

A numeric parameter which specifies a particular PDP context definition (see

AT+CGDCONT

command).

A string that identifies the MT in the address space applicable to the PDP. The address may be static or dynamic.

Note

• If no

<cid>

is specified, the write command will return a list of all defined contexts.

Test Command

AT+CGPADDR=?

Response(s)

[

+CGPADDR:

(list of defined

<cid>

s)]

Write Command

AT+CGPADDR=

[

<cid>

]]

Response(s)

[

+CGPADDR:

<cid>

<PDP_address>

]

[

+CGPADDR:

<cid>

<PDP_address>

]

ERROR

+CME ERROR

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

GSM 07.07

<cid>

(num)

<PDP_address>

(str)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 287 / 501

Search results

Summary of Contents for TC63

Reviews: