Siemens TC63 Command Set Download Page 327

Page: 327 / 501

TC63 AT Command Set

13.5 AT+CMGL

TC63_ATC_V00.490

Page 327 of 501

5/24/05

Confidential / Draft - Do not copy

13.5

AT+CMGL List SMS messages from preferred store

Syntax

Command Description

The execute command is the same as the write command with the given default for

<stat>

The write command returns messages with status value

<stat>

from message storage

<mem1>

to the TE. If

status of the message is 'received unread', status in the storage changes to 'received read'.

Test Command

AT+CMGL=?

Response(s)

+CMGL:

(list of supported

<stat>

Exec Command

AT+CMGL

Response(s)

+CMGL:

(see write command for default of

<stat>

)

Write Command

AT+CMGL=

<stat>

Response(s)

Output if text mode (

AT+CMGF

=1) and command successful:

For SMS- SUBMITs and/or SMS-DELIVERs

+CMGL:

<index>

<stat>

<oa>

<da>

, [

<alpha>

], [

<scts>

][,

<tooa>

<toda>

]

<data>

[... ]

For SMS-STATUS-REPORTs

+CMGL:

<index>

<stat>

<fo>

<mr>

, [

<ra>

], [

<tora>

<scts>

<dt>

<st>

[... ]

For SMS-Commands

+CMGL:

<index>

<stat>

<fo>

<ct>

[... ]

Output if PDU mode

AT+CMGF

=0 and command successful:

For SMS-SUBMITs and/or SMS-DELIVERs

+CMGL:

<index>

<stat>

, [

<alpha>

<pdu>

[... ]

If error is related to ME functionality

ERROR

+CMS ERROR

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

GSM 07.05

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 327 / 501

Search results

Summary of Contents for TC63

Reviews: