Siemens TC63 Command Set Download Page 353

Page: 353 / 501

TC63 AT Command Set

13.20 AT^SCMS

TC63_ATC_V00.490

Page 353 of 501

5/24/05

Confidential / Draft - Do not copy

13.20

AT^SCMS Send concatenated SMS messages

Sending a concatenated message is similar to sending a "normal" message, except that each segment of the

concatenated message must be identified by the additional parameters

<seq>

<ieia>

and

<ref>

. To send all

segments of the message one by one, the

AT^SCMS

write command must be executed for each segment.

Syntax

Command Description

The write command transmits one segment of a concatenated short message from TE to network (SMS-SUB-

MIT).

After invoking the write command wait for the prompt ">" and then start to write the message. To send the mes-

sage simply enter

<CTRL-Z>

. After the prompt a timer will be started to observe the input.

To abort sending use

<ESC>

. Abortion is acknowledged with "OK", though the message will not be sent.

The message reference

<mr>

is returned to the TE on successful message delivery. The value can be used to

identify the message in a delivery status report provided as an unsolicited result code.

Notes

• See notes provided for

AT+CMGS

• Command is only available if

AT+CMGF

=1.

Test Command

AT^SCMS=?

Response(s)

Write Command

Command syntax for text mode (see

AT+CMGF

=1):

AT^SCMS=

<da>

<toda>

<seq>

<max>

<ieia>

<ref>

<CR>

Text can be entered

<CTRL-Z>

<ESC>

Response(s)

+CMGS:

<mr>

<scts>

]

If sending fails

ERROR

+CMS ERROR

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

SIEMENS

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 353 / 501

Search results

Summary of Contents for TC63

Reviews: