24/88
Siemens Synco
900
CE1C2707en
Building Technologies
Commissioning the system
05.07.2007
Switching group relays
Switching groups with selected “Switch“ function can be assigned a
relay output.
State whether a switching group relay is used and how it is controlled.
Setting Description
---
Inactive – no switching group relay required
Via RF
Relay output Qx of an RRV91… heating circuit
controller used as a switching group relay
Q1 (local)
Relay output Q1 of the central apartment unit
used as a switching group relay
Main menu > Commissioning > Basic configuration >
Switching groups > Switching group X > Relay output:
Switching
group
Factory setting
Your setting
1 ---
--- (none)
Via RF
Q1 (local)
2 ---
--- (none)
Via RF
Q1 (local)
3 ---
--- (none)
Via RF
Q1 (local)
4 ---
--- (none)
Via RF
Q1 (local)
5 ---
--- (none)
Via RF
Q1 (local)
6 ---
--- (none)
Via RF
Q1 (local)
7 ---
--- (none)
Via RF
Q1 (local)
8 ---
--- (none)
Via RF
Q1 (local)
Configure doors
The central apartment unit can monitor up to two doors and display
their status on the info page.
A name can be assigned to each door.
Main menu > Commissioning > Basic configuration > Doors > Door X
> Door X:
Activate a door by setting the function to "Active":
Summary of Contents for Synco 900
