Siemens Synco 900, Mounting And Commissioning

Page: 56 / 88

56/88
Siemens Synco 900 CE1C2707en
Building Technologies Commissioning the system 05.07.2007
Assign devices to RF repeaters
For every individual device connected to the central apartment unit, it
can be determined via which repeater the respective RF signals are
to forwarded.
Main menu > Commissioning > Device list > Device X > RF repeater:
Setting choices:
---
No signal repetition (guide value)
RF repeater 1 Signal repetition by RF repeater 1
RF repeater 2 Signal repetition by RF repeater 2
RF repeater 3 Signal repetition by RF repeater 3
It is also possible to repeat signals from GAMMA wave devices (e.g.
from wall-mounted transmitters) which cannot be assigned to a cer-
tain function of the central apartment unit. These devices can be
made known to the central apartment unit via the following path.
GAMMA wave actuators connected to switching groups are
not contained on the device list. However, if the signals from a
GAMMA wave actuator should be repeated by an RF repeater,
the actuator can be included in the central apartment unit’s
device list according to the following description.
Main menu > Commissioning > RF connections > RF repeater >
Other RF devices > Connect device:
Confirm subentry “Connect device“ by pressing the Menu/ok button.
To make the connection, you is prompted to press the binding button
on the device to be connected.
Now, press the button on the respective GAMMA wave devices for at
least 10 seconds. To confirm a successful connection, the central
apartment unit delivers a beep.
For detailed information on commissioning the GAMMA wave
components, refer to the documentation covering the GAMMA
wave products.