Siemens Synco 900, Mounting And Commissioning

Page: 50 / 88

50/88
Siemens Synco 900 CE1C2707en
Building Technologies Commissioning the system 05.07.2007
Now, press the multifunction button on the heating circuit controller.
The LED lights up green. When it starts blinking, you can release the
binding button.
A successful connection is shown on the display of the central apart-
ment unit and be confirmed with a beep. Close the binding process
by pressing the
Menu/ok button.
Connect the input for absence
Inform the central apartment unit that you want to use a universal
input B of a heating circuit controller for connecting an absence con-
tact:
Main menu > Commissioning > RF connections > Inputs > Absence >
Connect device:
Confirm subentry “Connect device“ by pressing the Menu/ok button.
To make the connection, you is prompted to press the binding button
on the device to be connected.
Select universal input B with the channel selection button (CH) on the
heating circuit controller. The LED of the selected channel blinks. If
the selected channel is not yet connected, the connection LED
flashes.
Now, press the multifunction button on the heating circuit controller.
The LED lights up green. When it starts blinking, you can release the
binding button.
A successful connection is shown on the display of the central apart-
ment unit and be confirmed with a beep. Close the binding process
by pressing the
Menu/ok button.
Connect the input for twilight
Inform the central apartment unit that you want to use a universal
input B of a heating circuit controller or a door / window contact wave
AP 260 for connecting a twilight switch:
Main menu > Commissioning > RF connections > Inputs > Twilight >
Connect device:
Confirm subentry “Connect device“ by pressing the Menu/ok button.
To make the connection, you is prompted to press the binding button
on the device to be connected.
If you want to use a universal input B of a heating circuit controller as
a twilight input, select it with the channel selection button (CH) and
press the binding button. The LED lights up green. When it starts
blinking, you can release the binding button.
If you want to use the external input of a door / window contact wave
AP 260 as a twilight input, press the button on the door / window
contact for about 1 second. Then, the LED blinks for a few seconds.
A successful connection is shown on the display of the central apart-
ment unit and be confirmed with a beep. Close the binding process
by pressing the
Menu/ok button.