Siemens Synco 900, Mounting And Commissioning

Page: 55 / 88

55/88
Siemens Synco 900 CE1C2707en
Building Technologies Commissioning the system 05.07.2007
Connect RF repeaters
You can connect up to 3 RF repeaters.
To enable an RF repeater (1…3) to be connected, it must
previously have been activated in the basic configuration
(refer to page 36).
An RF repeater is automatically switched on as soon as power is
applied via the AC adapter, which is included in the scope of supply.
The LED lights up green for 2 seconds.
In the case of an RF repeater that is already connected, the LED
extinguishes afterwards. The repeater is now ready for operation.
But if the RF repeater is not yet connected, the LED starts flashing
green. The repeater is now ready for making the connection.
Inform the central apartment unit that you want to connect an RF
repeater:
Main menu > Commissioning > RF connections > RF repeater >
RF repeater X > Connect device:
Confirm subentry “Connect device“ by pressing the Menu/ok button.
To make the connection, you is prompted to press the binding button
on the device to be connected.
F
LED
2
707
Z
18
Now, to open the connection, press
multifunction button F on the RF
repeater. The LED lights up green.
When it starts blinking, you can
release the binding button.
F = multifunction button
LED = light emitting diode
Now, the connection LED on the RF repeater blinks green and extin-
guishes on successful completion of the binding process with the
central apartment unit. To confirm the successful connection, the
central apartment unit delivers a beep. Close the binding process by
pressing the
Menu/ok button.
The RF repeater is now connected and performs its normal operation.
If the binding process with the central apartment unit proved
unsuccessful, blinking of the LED changes to flashing after 1
minute (status indication of unbound operation).