Siemens Synco 900, Mounting And Commissioning

Page: 43 / 88

43/88
Siemens Synco 900 CE1C2707en
Building Technologies Commissioning the system 05.07.2007
The connection of the heating circuit controller is made individually for
each required channel.
To connect a heating circuit controller channel, press the channel
selection button (CH) to select a suitable channel (channels Y1 and
Y2 with the RRV912, channels 1..8 with the RRV918). The LED of
the selected channel blinks. If the selected channel is not yet con-
nected, the connection LED flashes.
If no button is pressed for 10 minutes, the heating circuit con-
troller returns to normal operation.
Now, press the multifunction button on the heating circuit controller.
The LED lights up green. As soon as it starts blinking, you can re-
lease the binding button.
The first channel of a room that has been connected assumes
lead control. The other channels of the same room that have
been connected is controlled in parallel.
After successful connection, the heating circuit controller is restarted.
Now, the heating circuit controller has returned to channel selection
mode and is ready for connecting another channel.
Connect window contacts
The window / door contact wave AP 260 is ready to operate as soon
as the inserted batteries supply power.
For detailed information, refer to the documentation covering
the GAMMA wave products.
The door / window contact is connected by pressing the multifunction
button on the door or window contact for at least one second. If the
learning telegrams were forwarded, the LED blinks for about 3 sec-
onds.
To confirm the successful connection, the central apartment unit de-
livers a beep. When all devices of the room are connected, close the
binding process by pressing the
Menu/ok button.
Connect smoke detectors
When connecting smoke detectors, they are always assigned to a
room. Inform the central apartment unit which room you want to as-
sign a smoke detector:
Main menu > Commissioning > RF connections > Smoke detector >
Room X > Connect device:
The DELTA reflex smoke detector is automatically switched on as
soon as the inserted batteries supply power.
For detailed information, refer to the documentation supplied
with the smoke detector.