Siemens Synco 900 Mounting And Commissioning Download Page 45 | Manualshive

Page: 45 / 88

background image

45/88

Siemens Synco

900

CE1C2707en

Building Technologies

Commissioning the system

05.07.2007

Connect the output for the DHW pump / valve

Inform the central apartment unit that you want to use a universal
relay output Qx of a heating circuit controller for connecting the DHW
pump / valve:

Main menu > Commissioning > RF connections > DHW >
DHW pump/valve > Connect device:

Confirm subentry “Connect device“ by pressing the

Menu/ok

button.

To make the connection, you is prompted to press the binding button
on the device to be connected.

Select a universal relay output Qx with the channel selection button
(CH) on the heating circuit controller. The LED of the selected chan-
nel blinks. If the selected channel is not yet connected, the connec-
tion LED flashes.
Now, press the multifunction button on the heating circuit controller.
The LED lights up green. When it starts blinking, you can release the
binding button.
A successful connection is shown on the display of the central apart-
ment unit and be confirmed with a beep. Close the binding process
by pressing the

Menu/ok

button.

Connect the output for the electric immersion heater

Inform the central apartment unit that you want to use a universal
relay output Qx of a heating circuit controller for connecting the elec-
tric immersion heater:

Main menu > Commissioning > RF connections > DHW >
Electric immersion heater > Connect device:

Confirm subentry “Connect device“ by pressing the

Menu/ok

button.

To make the connection, you is prompted to press the binding button
on the device to be connected.

Select a universal relay output Qx with the channel selection button
(CH) on the heating circuit controller. The LED of the selected chan-
nel blinks. If the selected channel is not yet connected, the connec-
tion LED flashes.
Now, press the multifunction button on the heating circuit controller.
The LED lights up green. When it starts blinking, you can release the
binding button.
A successful connection is shown on the display of the central apart-
ment unit and be confirmed with a beep. Close the binding process
by pressing the

Menu/ok

button.

«
...
43
44
45
46
47
...
»

Summary of Contents for Synco 900

























































































Reviews:

No comments

Related manuals for Synco 900

Brand: Eaton Pages: 16

Brand: Balboa Instruments Pages: 10

Brand: Raymarine Pages: 12

Brand: G1SLE Pages: 2

Brand: L. G. B. Pages: 2

Brand: L-Acoustics Pages: 36

Tracer CH.530 RLC-SVU01B-E4

Brand: Trane Pages: 60

Brand: Grundfos Pages: 80

Brand: NCE Pages: 4

Brand: DAYLIFF Pages: 40

PCI-to-IDE ATA-133

Brand: Acard Pages: 33

MotorController WCC 310

Brand: Window Master Pages: 19

LS-RGB-DMX CONTROL

Brand: JBSYSTEMS Light Pages: 12

Ramping and Profiling Microprocessor-Based Control SERIES 1500

Brand: Watlow Pages: 90

Brand: SSHC Pages: 2

Brand: InnoMedia Pages: 10

Brand: ICP DAS USA Pages: 153

Brand: Yardian Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands