manualshive.com logo in svg

Siemens SITOP BUF8600, Manual, Page: 124 / 252

Share
Download
Siemens SITOP BUF8600 Manual Download Page 124

Engineering and remote access 

 

7.3 SIMATIC STEP 7 in the TIA Portal 

 

PSU8600power supply systems 

124

 

Manual, 04.2016, A5E35883207-7-76 

3.

 

Select the required expansion module in the Hardware catalog. In the "Information" area 

you can see information about the expansion module, and when necessary you can 

change the preselected (default) version. 

4.

 

Drag the expansion module and drop it into the Device view. 
Alternatively, the expansion module can also be added by double-clicking on the entry in 

the Hardware catalog. 

5.

 

Drag and drop the expansion module to the required slot to the right of the SITOP 

PSU8600. 
The expansion module is inserted into the selected slot. 

 

6.

 

Save the hardware configuration. 

You have assigned an expansion module to the basic device. How you parameterize the 

expansion module is described under Parameterizing outputs (Page 136). 

Summary of Contents for SITOP BUF8600





























































































































































































































































Reviews:

No comments