Introduction
1.1 Important notes
SIMOCODE pro - Communication
8
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
SIMOCODE pro response tables
Specific responses (deactivated, signaling, warning, tripping) can be parameterized for
various SIMOCODE pro functions, such as overload. These are always displayed in tabular
form:
●
"X" = Applicable
●
"—" = Not applicable
●
Default values are marked "d" for "default" in parentheses.
Response
Function 1
Function 2
Function 3
Tripping
—
X (d)
X
Warning
X (d)
X
—
Signaling
X
X
—
Deactivated
X
X
X (d)
Delay
0 ... 25.5 s (default: 0)
—
—
Brief description of the responses:
●
Tripping: The contactor controls QE* are tripped. A fault message is generated which is
available as a diagnosis via PROFIBUS DP. The fault message and the device-internal
signal remain on until the appropriate length of time has elapsed or the cause of the fault
has been eliminated and acknowledged.
●
Warning: In addition to the device-internal signal, a warning signal is generated that is
available as diagnostics via the communication bus.
●
Signaling: Only a device-internal signal is generated, which can be further processed as
required.
●
Deactivated: The appropriate function is switched off, no signals are generated.
A delay time can also be set for specific responses.