Siemens SIMEAS R-PMU, Manual, Page: 32 / 296

4
4.8 Housing Versions
32
Digital Fault Recorder, SIMEAS R-PMU, Manual
E50417-H1076-C360-A5, Release 10.2012
4.8 Housing Versions
Designs
The SIMEAS R-PMU is available in two different designs depending on the application.
‰
Central unit ZE 8/16 (10-inch housing) with 1 DAU slot, flush or surface mounted housing
‰
Central unit ZE 32/64 (19-inch housing) with 4 DAU slots, flush or surface mounted housing
Slot 1 is reserved for the CPU, always the last slot from the power supply unit. The remaining
slots can be equipped with the different data acquisition units (DAUs).
The modules are installed vertically in the frame and can be changed from the front side. The
terminals are located at the rear of the frame.
View
The front and the rear view of a ZE 8/16 with a CDAU are shown here as an example.
Figure 4-5 SIMEAS R-PMU (ZE 8/16): front and rear view (flush mounted housing)
Display of operational
conditions (LEDs)
Front interface
(COM S) Buttons for manual
trigger, test mode,
blocking mode, etc.
Switch
On/Off Connection for
mains supply Message inputs
and outputs LAN
interface
Analog
measurement
channels
Binary
measurement
channels Interfaces for
printer (LPT 1)
and external modem
(COM 1)