Siemens SIMATIC MV500 Operating Instructions Manual Download Page 98

Page: 98 / 294

Network and system integration

4.5 System setup via the RS-232 interface

SIMATIC MV500

Operating Instructions, 03/2021, C79000-G8976-C494-05

4.5

System setup via the RS-232 interface

①

Optical sensor or light barrier (for trigger signal)

②

Object with code

Figure 4-4

Example: System configuration via the RS232 interface

System characteristics

•

The results of the optical reader are output to the controller via the RS232 interface.

•

The optical reader is triggered either via digital I/O, RS232 or via the built-in auto-trigger

function.

•

A PC/programming device is connected via Ethernet for the adjustment procedure.

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 98 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: