Siemens SIMATIC MV500 Operating Instructions Manual Download Page 116

Page: 116 / 294

Connection

6.2 Power supply using Power over Ethernet (PoE)

SIMATIC MV500

116

Operating Instructions, 03/2021, C79000-G8976-C494-05

Only connect safety extra-low voltage (SELV) according to IEC 62368-1

WARNING

Operation with safety extra-low voltage

The device is designed for operation with safety extralow voltage (SELV). This means that

only safety extra-low voltages (SELV) according to IEC 62368-1 can be connected to the

power supply terminals.
The power unit for supplying the device must comply with NEC Class 2 as described by the

National Electrical Code(r) (ANSI/NFPA 70).
The power of all connected power supply units must total the equivalent of a power source

with limited power (LPS limited power source).

6.2

Power supply using Power over Ethernet (PoE)

"Power over Ethernet" (PoE) is a power supply technology for network components

complying with IEEE 802.3af.
•

The power is supplied over the Ethernet cables used to connect the individual network

components (corresponding to IEEE 802.3af) with one another. This makes an additional

power cable unnecessary.

•

SIMATIC MV500 is a PD (Powered Device), Type 1, Class 3 (max. 12.95 W)

Note that the power supply via POE is only possible via the "X1 LAN1" Ethernet interface.

When using the POU power supply, you must enable the setting "Settings > Options >

Lighting > Power via POU or CM".

Restriction of the power supply type

The IEEE standard 802.3af specifies two types of power supplies:
•

Voltage via wire pairs that are not used for data transmission (redundant wires).

•

Voltage via wire pairs that are used for data transmission (phantom power).

The Ethernet connection of the SIMATIC MV500 optical readers is four-wire. Power can only

be suppled via these four wires with phantom power. The voltage feeding device must

provide the phantom power.
The following Siemens switches with PoE provide phantom power:
•

SCALANCE X108 POE

•

SCALANCE XP208 POE EEC

•

SCALANCE XP216 POE EEC

•

SCALANCE X308-2M POE

•

SCALANCE XR324-4M POE

•

SCALANCE XR324-4M POE TS

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 116 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: