Siemens SIMATIC MV500 Operating Instructions Manual Download Page 145

Page: 145 / 294

Operator control and monitoring

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

145

Reader status and access status

The reader status indicates the status of the reader at the current time.

Table 8- 1

Reader status

Icon

Description

Start

The reader has the status "Start". This means that the device is currently in

processing mode (RUN).

Stop

The reader has the status "Stop". This means that the device is currently

neither in processing mode nor in productive operation. There is no opera-

tion (STOP).

Edit

The reader has the status "Edit". This means that the device is currently in

edit mode and configuration changes can be made.

Adapt

The reader has the status "Adapt". This means that the device is currently

in adaption mode. This mode is started either by the "READ" button or by

the "Full program" function in the program step "Overview > Auto-

adaption".

The access status indicates the status of the WBM at the current time.

Table 8- 2

Access status

Icon

Description

Red padlock

With "Read-only" status, no operation is possible because the WBM of

another PC has control over the optical reader.

Blue padlock

The user management of the WBM is active.

Red-gray padlock

DISA is active. Operation is not possible in this status because an automa-

tion system is in control of the optical reader. Only users that have the

"Take control" right are capable of taking over control of the optical reader

from the automation system.

Green padlock

The currently logged on user has taken control of the optical reader. Dur-

ing this time, the connected controller cannot access the optical reader.

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 145 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: