Siemens SIMATIC MV500 Operating Instructions Manual Download Page 19

Page: 19 / 294

Description

1.2 Product characteristics

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

•

Up to 150 codes can be read per image acquisition (SIMATIC MV500 U/X)

•

Code verification according to ISO/IEC 16022

Integrated communications interfaces

•

Ethernet 10/100/1000 Mbps for TCP/IP and PROFINET IO depending on the device version

•

1 trigger input and 1 flash output

–

Response time of the trigger input: 50-70 us

–

Jitter (fluctuation of response time): max. 40 ns

Incoming triggers during a running image acquisition do not interrupt it. Triggers that are

incoming during an image acquisition are handled as NOK processing procedures and

included in the processing statistics.

•

Communication module interface

•

RS232 with TxD and RxD

•

2 configurable digital inputs/outputs

Extended communication via communication modules

•

ASM 456 for PROFIBUS DP/V1

•

RF120C, RF170C, RF180C and RF185C/RF186C/RF188C for PROFINET

Power over Ethernet

Integrate power supply via Ethernet cable (PoE)

Robust construction, suitable for industry

Degree of protection IP67

With the protective lens barrel screwed on and all interfaces closed by cable connections or

protective caps.

Protective lens barrel

Barrel with filter thread

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 19 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: