Siemens SIMATIC MV500 Operating Instructions Manual Download Page 20

Page: 20 / 294

Description

1.2 Product characteristics

SIMATIC MV500

Operating Instructions, 03/2021, C79000-G8976-C494-05

Optical system

•

Mechanical mini-lenses

•

Electronic focus lenses (via software-controlled focal plane)

–

Fast change of focal plane

–

Wear-free (without moving mechanics)

–

temperature stabilized

Lighting

•

High-intensity built-in ring lights with up to 12 LEDs

–

In the versions: Multi, Basic or Remote in the colors white, red and infrared

–

With switchable lighting segments

–

With switchable polarization filter

–

With integrated reflection protection

•

External ring lights

Operation on the device

Fast, uncomplicated connection between PC and reader without installed software using the

"CONNECT" button.
Quick adaption to the reading situation using the "READ" button.

Web Based Management (WBM)

•

Completely installation-free

•

Modern HTML5 design

•

Fast response times

•

Auto-adaption function

•

Secure communication over https

•

Versatile HTML pages for monitoring the reader

•

Extensive operator control and monitoring functions even in processing mode

•

Wide-ranging diagnostics and logging functions:

–

Error image memory

–

Event logging

•

Firmware update

•

System backup and restoration

•

Option of user-defined, integrated user interfaces

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 20 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: