Siemens SIMATIC MV500 Operating Instructions Manual Download Page 27

Page: 27 / 294

Description

1.7 Functional description

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

Compatibility with MV400

The functions, communication protocols and configurations are largely compatible with the

devices of the SIMATIC MV400 series. The device configurations for these devices can be

imported into the readers of the SIMATIC MV500, enabling a seamless transition from

SIMATIC MV400 to MV500.
Note that after importing an MV400 device configuration, the program must be saved again.

Table 1- 1

Differences / possible incompatibilities

SIMATIC MV400

SIMATIC MV500

Digital inputs

/outputs

DI trigger, DQ strobe,

4 configurable DI/DQs

DI trigger, DQ strobe,

2 DQs

RS232 interface

9.6 ... 115 KB

1 ◆ 1.5 ◆ 2

stop bits

9.6 ... 115 KB

1 ◆ 2 stop bits

DISA bit (via)

RS232, CM, TCP/IP, PN, DI

RS232, CM, TCP/IP, PN

DHCP modes

Client and server

Client

(CONNECT button)

WebAPI

✓

(incompatible with MV400)

The MV400 "Resolution, half" function is no longer available on MV500 due to faster image

acquisition times.

NOTICE
Compatibility restrictions

Note that the following functions are not supported by MV400 in the software versions ≤

V2.0:
•

Calibrated verification (Veri-Genius license),

•

Vericode

•

OCR (Text Genius) and

•

Locator function (Pat genius)

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 27 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: