Siemens SIMATIC MV500 Operating Instructions Manual Download

Page: 218 / 294

Process interfacing via an automation system (PLC, PC)

9.10 Example programs

SIMATIC MV500

218

Operating Instructions, 03/2021, C79000-G8976-C494-05

Please note that there is only one common setting for MMI transfer and the internal error

image memory. It is not possible to make separate and therefore different settings here.

Requirements

•

.NET Framework v4.0 must be installed to run the demo program.

•

The PC must be connected with the optical reader over the Ethernet interface.

•

The Ethernet interface involved and the PC must be located in the same subnet.

Settings in WBM

Make the following settings in the WBM:
•

"Settings > Communication > Interfaces > Archiving/MMI" menu:
Enter the IP address and the port of the PC on which you want to archive the diagnostic

information.

•

"Settings > Communication > Use > Diagnostics transfer" menu:
Select from the drop-down lists which data you want to archive: Diagnostics data sets,

diagnostic images or both.

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Related manuals for SIMATIC MV500

Brands by name

Popular brands

Siemens SIMATIC MV500, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC MV500

Reviews:

Related manuals for SIMATIC MV500

Brands by name

Popular brands