Siemens SIMATIC MV500 Operating Instructions Manual Download Page 134

Page: 134 / 294

Commissioning

7.4 Connecting and setting up the reader

SIMATIC MV500

134

Operating Instructions, 03/2021, C79000-G8976-C494-05

Note
Ethernet connection via the "X2 LAN2" interface

Note that you can only establish a connection to the optical reader via the "X1 LAN1" Ethernet

interface using SINEC PNI. You can configure the "X2 LAN2" Ethernet interface via the WBM

"Settings > Communication > Interface > Ethernet" or using a DHCP server.

Device flash test

If several readers are connected to the network/PC, it is possible to make the LK LEDs of the

device selected in the output window flash. Using the device flash test, you can identify the

required reader quickly and simply.
Follow the steps below to identify the relevant reader using the flash test:
1.

Select the desired module from the device list in the "Device list" menu.

Click on the "Flash LED" button in the toolbar.
Reaction: The LK LED flashes at a frequency of 1 Hz (1 s) on the selected reader.

Click the "Stop" button to stop the flashing.

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 134 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: