Siemens SIMATIC MV500 Operating Instructions Manual Download Page 209

Page: 209 / 294

Process interfacing via an automation system (PLC, PC)

9.8 Remote client

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

209

The "XML Backup" and "XML Restore" functions each have their own HTTP requests. After the

reader has received one of these HTTP requests, if the requirements have been met, the

following tasks are first performed in both cases:
1.

The connection to the WBM is terminated.
While the HTTP request is being processed by the optical reader, you can only open the

WBM in READ ONLY mode.

The optical reader changes to "Stop" mode.

The IN_OP bit is set to "0".

9.8.2

XML backup

Once the optical reader has sent the HTTP response, the "IN_OP" bit is set and access via the

WBM is permitted again.

Request

Stucture and properties of the request:
•

URI: http://<IP address of the optical reader>/xml/backup.cgi
e.g. http://192.168.0.42/xml/backup.cgi

•

HTTP method: GET

Response

Structure and properties of the response:
•

HTTP status code 200 (OK)

•

Content type: text/xml
name = "<file name>.xml"

•

Content disposition: attachment
filename="<file name>.xml"

Note
Structure of the "<File name>" parameter

The file name consists of the name of the optical reader and the firmware version.

The data corresponds to the file content of an xml file that is used to restore the settings and

programs.

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 209 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: