Siemens SIMATIC MV500 Operating Instructions Manual Download

Page: 100 / 294

Network and system integration

4.7 System configuration with CM and auto-trigger

SIMATIC MV500

100

Operating Instructions, 03/2021, C79000-G8976-C494-05

4.7

System configuration with CM and auto-trigger

①

Object with code

Figure 4-6

Example: System configuration of optical reader with auto-trigger function

System characteristics

•

Power supply and system integration are provided through a communication module or

over Ethernet.

•

To trigger the reader, no light barrier or similar must be installed. The triggering is

performed in the optical reader itself, as soon as a readable code comes into the field of

view of the optical reader (auto-trigger).

•

A PC/programming device is connected via Ethernet to allow adjustment of the device.

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Related manuals for SIMATIC MV500

Brands by name

Popular brands

Siemens SIMATIC MV500, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC MV500

Reviews:

Related manuals for SIMATIC MV500

Brands by name

Popular brands