Siemens SIMATIC MV500 Operating Instructions Manual Download Page 239

Page: 239 / 294

Service and maintenance

10.1 Error and diagnostics messages

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

239

Table 10- 11 Diagnostic information of SFB 52 "RDREC"

Byte

Value

Meaning

0 ... 1

W#16#0010

Data record type: Diagnostics data record

2 ... 3

W#16#0012

Data record length starting at byte 4: 18 bytes

4 ... 5

W#16#0100

Version

6 ... 7

W#16#0000

Slot

8 ... 9

W#16#0000

Subslot

10 ... 11

W#16#0000

Channel

B#16#08 / B#16#10

Error occurred / no error occurred

B#16#05

Identifier indicating that all variables are stored in words starting at byte

14.

14 ... 15

W#16#0004

ID for vendor-specific diagnostics (fixed)

16 ... 17

W#16#0000

Channel number

18 ... 19

W#16#0805 / W#16#1005

Content identical to that of bytes 12 and 13.

20 ... 21

See value with the section "Error

messages (Page 224)"

ID of the error that occurred.

10.1.9

Error messages from automatic data backup

If you have activated Automatic data backup ("Settings > Options > Extras") and a data

backup situation occurs, errors may occur that prevent you from creating a backup. These

errors are displayed in the "Important Information" window when the WBM is opened and

logged in the diagnostic data records.

Table 10- 12 Error messages from automatic data backup

Error message

Description

No microSD card available

For automatic data backup, a MicroSD card must be inserted in the

reader.

Solution: Ensure that the MicroSD adapter is correctly installed and

that a MicroSD card is inserted.

The microSD card has the

wrong format

The inserted MicroSD card does not have the required format. Only

MicroSD cards with the "FAT32" file system are supported.

Solution: Ensure that the MicroSD card is correctly formatted.

Unable to free sufficient

space on the microSD card

There is not enough space available on the MicroSD card and the dele-

tion of old data backups could not free up enough space.

Solution:
•

Use a MicroSD card with a larger memory capacity.

•

Reduce the amount of memory to be kept free ("Settings > Options

> Extras").

•

Free up space on the MicroSD card by deleting unnecessary files.

Could not create backup file No backup file could be created.

Solution:
•

Ensure that the MicroSD card is not faulty or write-protected.

•

Use another MicroSD card.

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 239 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: