Siemens SIMATIC MV500 Operating Instructions Manual Download Page 96

Page: 96 / 294

Network and system integration

4.3 System configuration of the optical reader as PROFINET IO device with switch and FB 79 or Ident profile

SIMATIC MV500

Operating Instructions, 03/2021, C79000-G8976-C494-05

①

Optical sensor or light barrier (for trigger signal)

②

Object with code

Figure 4-2

Example: System configuration of the optical reader as PROFINET IO device and FB 79 or

Ident profile

System characteristics

•

A connection to a PROFINET IO-capable S7 controller is established via Ethernet.

•

The optical reader is controlled by the S7 controller.

•

The result output of the test objects takes place via PROFINET IO to the S7 controller.

•

The optical reader is triggered either via digital I/O, PROFINET or via the built-in auto-

trigger function.

•

A PC/programming device is connected via Ethernet for the adjustment procedure.

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 96 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: