Siemens SIMATIC MV500 Operating Instructions Manual Download Page 146

Page: 146 / 294

Operator control and monitoring

SIMATIC MV500

146

Operating Instructions, 03/2021, C79000-G8976-C494-05

Login area

With enabled user management ("Settings > User management"), you must log on in this

area to be able to make changes in the WBM with your login. Your user name is displayed as

soon as you are logged in. If you are already logged in, you can log out in this area.

NOTICE
Parallel operation not possible through users and connected automation system

Note that users that have been assigned a role with the "Take control" right may take over

control of the optical reader from the automation system through their login. In this case,

the automation system cannot change the status or program during this time.

Help

You can call the online help for the WBM using the question mark symbol "?". The help is

context-sensitive. Depending on the menu you are currently in, the appropriate help page is

opened.

Main window

The main window shows the contents of the selected menu items. Here, you can configure

the various menu-dependent parameters. The main window is divided up into three columns

in the menu items "Application" and "Libraries".

Message area

The message area displays all WBM-related error messages and warnings (e.g. transfer

errors). If messages or warnings are present, they are displayed at the top of the main

window. Note that the message area is only displayed on the homepage of the WBM.

WBM alternatives

You can find information on alternative operating options in the section "Alternative user

interfaces (Page 280)".

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 146 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: