Siemens SIMATIC FM 453, Manual

Page: 343 / 380

11-27
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Table 11-8 General Data Errors, Machine Data Errors, Traversing Program Errors, continued
Cl.
Message/
Display
Error Message,
Error Analysis and Elimination
No.
General data errors Error response: ”Warning” see Table 11-2
4 (04) 131 (83) Not possible to insert block CBS
Cause Memory full.
or
DB
Effect Function is not executed.
DB
Elimina-
tion Delete unnecessary DBs and repeat function.
4 (04) 132 (84) Not possible to delete block CBS
Cause Block does not exist, no “assignment bit (bytes 2 and 3) enabled in
block (when data available).
or
DB
Effect Function is not executed.
Elimina-
tion Check program and repeat function with correct block number.
Machine data errors Error response: “Warning” see Table 11-2
5 (05) 7 (07) Measurement system CBS
Cause The measurement system grid (MSR) entered does not agree with
the MSR in the other DBs of the module.
or
DB
Effect DB does not become effective and is stored non-retentively.
Elimina-
tion
S
Check MSR and correct as necessary.
S
When making correct input, delete the other DBs on the mod-
ule before retransmitting.
5 (05) 8 (08) Type of axis CBS
Cause No linear or rotary axis parameterized.
or
DB
Effect DB does not become effective and is stored non-retentively.
DB
Elimina-
tion Correct and retransmit.
5 (05) 9 (09) Rotary axis CBS
Cause Impermissible value range or dependency violation
(see Section 5.3.1)
or
DB
Effect DB does not become effective and is stored non-retentively.
Elimina-
tion Correct and retransmit.
5 (05) 10 (0A) Encoder type CBS
Cause Unacceptable type of encoder.
or
DB
Effect DB does not become effective and is stored non-retentively.
DB
Elimina-
tion Correct and retransmit.
Cl. = Detail event class, No. = Detail event number, CBS = Checkback signals, DB = Data block
Note: Value (xx) = Hexadecimal notation of the error number.
Troubleshooting