Siemens SIMATIC FM 453, Manual

Page: 338 / 380

11-22
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Table 11-8 General Data Errors, Machine Data Errors, Traversing Program Errors
Cl. No.
Error Message,
Error Analysis and Elimination
Message/
Display
General data errors Error response: ”Warning” see Table 11-2
4 (04) 1 (01) Data at time of transmission unacceptable CBS
Cause Data not transmitted in appropriate operating mode.
or
DB
Effect Data not accepted.
DB
Elimina-
tion Transmit data in appropriate operating mode.
4 (04) 2 (02) Velocity level 1 incorrect CBS
Cause Velocity not within the range between > 0 and max. allowable tra-
verse velocity (500 000 000 MSR/min).
or
DB
Effect Velocity does not become effective.
Elimina-
tion Input an allowed velocity value.
4 (04) 3 (03) Velocity level 2 incorrect CBS
Cause Velocity not within the range between > 0 and max. allowable tra-
verse velocity (500 000 000 MSR/min).
or
DB
Effect Velocity does not become effective.
Elimina-
tion Input an allowed velocity value.
4 (04) 4 (04) Voltage/frequency level 1 is incorrect CBS
Cause Voltage/frequency specified does not fall within the range of
10 V.
or
DB
Effect Voltage/frequency level does not become effective.
Elimina-
tion Input an allowed voltage/frequency value.
4 (04) 5 (05) Voltage/frequency level 2 is incorrect CBS
Cause Voltage/frequency specified does not fall within the range of
10 V.
or
DB
Effect Voltage/frequency level does not become effective.
Elimina-
tion Input an allowed voltage/frequency value.
4 (04) 6 (06) Preset incremental value too high CBS
Cause Incremental value is greater than 10
9
MSR.
or
DB
Effect Original incremental value is retained.
DB
Elimina-
tion Input an allowable incremental value.
Cl. = Detail event class, No. = Detail event number, CBS = Checkback signals, DB = Data block
Note: Value (xx) = Hexadecimal notation of the error number.
Troubleshooting