Siemens SIMATIC FM 453, Manual

Page: 342 / 380

11-26
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Table 11-8 General Data Errors, Machine Data Errors, Traversing Program Errors, continued
Cl.
Message/
Display
Error Message,
Error Analysis and Elimination
No.
General data errors Error response: ”Warning” see Table 11-2
4 (04) 124 (7C) “Save” parameter incorrect CBS
Cause Coding not 0 or 1.
or
DB
Effect DB does not become effective and is stored non-retentively.
DB
Elimina-
tion Coding not 0 or 1.
4 (04) 125 (7D) DB memory filed CBS
Cause The available memory is assigned.
or
DB
Effect DB does not become effective and is stored non-retentively.
DB
Elimina-
tion Delete unnecessary programs (DBs) or compress memory by way
of parametering interface.
4 (04) 126 (7E) Allowable program length exceeded CBS
Cause Number of blocks too high.
or
DB
Effect DB does not become effective and is stored non-retentively.
DB
Elimina-
tion Correct program and retransmit.
4 (04) 127 (7F) Writing parameters/data is not possible CBS
Cause Axis does not come to a stop.
or
DB
Effect Parameters/data do not become effective.
DB
Elimina-
tion Stop axis.
4 (04) 128 (80)
Incorrect module identification
CBS
Cause DBs which do not belong to the module were transmitted
(no identification 453).
or
DB
Effect DB does not become effective and is stored non-retentively.
Elimina-
tion Transmit the DBs belonging to the FM 453.
4 (04) 129 (81) Incremental value, incorrect value CBS
Cause Value range outside 10
9
.
or
DB
Effect Incremental value not effective.
DB
Elimina-
tion Transmit correct value.
4 (04) 130 (82) Tool offset, incorrect value CBS
Cause Value range outside 10
9
.
or
DB
Effect Tool offset not effective.
DB
Elimina-
tion Transmit correct value.
Cl. = Detail event class, No. = Detail event number, CBS = Checkback signals, DB = Data block
Note: Value (xx) = Hexadecimal notation of the error number.
Troubleshooting