
3-2
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
3.1
Installing the FM 453
No particular protective measures (EGB Guidelines) are necessary for the
installation of the FM 453.
Note
Please refer to Appendix B in the manual S7-400/M7-400 Programmable
Controller, Hardware and Installation.
A 4.5 mm (0.18 inch) screwdriver.
To install the FM 453:
1. Hook the FM 453 onto the rail and swing it into position.
2. Screw the FM 453 down (torque approx. 0.8 to 1.1 Nm).
3. Attach the sub-D plugs to the encoder and drive unit.
4. Attach the front connector.
5. Fit the connector cover and lock it in place.
6. After the modules have been mounted, you can also assign each of them a
slot number. Slot labels for this purpose are enclosed with the rack.
The numbering scheme and how to plug in the slot labels are described in
the manual S7-400/M7-400 Programmable Controller, Hardware and
Installation .
Note
The slot determines the initial address of each module.
Rules
Tools Required
Procedure
Installing and Removing the FM 453
Summary of Contents for SIMATIC FM 453
Page 6: ...vi FM 453 Servo Drive Step Drive Positioning Module C79000 G7076 C453 01 Preface ...
Page 14: ...xiv FM 453 Servo Drive Step Drive Positioning Module C79000 G7076 C453 01 Table of Contents ...
Page 378: ...Index 6 FM 453 Servo Drive Step Drive Positioning Module C79000 G7076 C453 01 Index ...