Siemens SIMATIC FM 453, Manual

Page: 191 / 380

8-7
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
8.2 Analysis of the User DB by the User Program for Operator Control
The following table describes for you which functions must be executed by
the user program. Execution of these functions is triggered by setting/deleting
of certain memory bits of the operator panel or by certain events within the
FM 453 (e.g. error messages).
Table 8-1 Analysis of the User DB by the User Program
OP 17
Triggered by
User Program See
PIC...
Byte.Bit
Event
gg y
–
Set in User DB
(Byte.Bit)
Function
Delete
Byte.Bit
OP 17
FM 453 390.13
390.14
390.15 Diagnostic interrupt
Data errors
Operator control and guidance errors 7
390.9 = 1
390.10 = 1
42.14 = 1
SK “IWset”
SK “NPVset”
SK “IWrü”
Transfer data for “set actual value” from
user DB to the FM
Transfer data for “Zero point offset”
from user DB to the FM
Transfer “Remove setting actual value”
flag to the FM
390.9
390.10
42.14
72
42.10 = 1
42.11 = 1
390.3 = 1
SK “SAvor”
SK “SArü”
SK “set”
Transfer “Automatic block search, for-
ward” memory bit to the FM
Transfer the “Automatic block search,
backward” memory bit to the FM
Transfer data for “Program selection”
from user DB to the FM
42.10
42.11
390.3
734
390.4 = 1 SK “set” Transfer data for “Teach In” from the
user DB to the FM 390.4 735
390.2 = 1 SK “set” Transfer data for “MDI block entry”
from the user DB to the FM 390.2 74
390.8 = 1 SK “set” Transfer data for “MDI block on the fly”
from the user DB to the FM 390.8 741
40.0
40.6
TF “servo en-
able”
TF “park.
axis”
In case of modification, transfer “Con-
troller enable” yes/no to the FM
In case of modification, transfer “park-
ing axis” yes/no to the FM
761
SK = Soft key, TF = Text field
Overview
Man-Machine Interface