Siemens SIMATIC ET 200eco PN, Operating Instructions Manual

Page: 48 / 278

Table 3-14 Pin assignment for digital outputs
Pin Assignment X7 and X8 (2L+ switched) View of the cable connector
(wiring side)
1 Not used
2 Output signal DQ
1
: Connector X7
Output signal DQ
3
: Connector X8
3 Supply ground 2M
4 Output signal DQ
0
: Connector X7
Output signal DQ
2
: Connector X8
5 Functional earth FE
;;
IO-Link Master 4 IO‑L 4×M12 (6ES7148-6JD00-0AB0)
The following tables contain the pin assignments for the IO-Link Master 4 IO-L 4×M12.
Pin Assignment of X1 to X4 View of the cable connector
(wiring side)
1 24 V sensor supply 1U
S
(derived from 1L+ non-switched)
2 24 V actuator supply 2U
A
3 Sensor supply ground 1M
4 IO-Link master
Port 1 (C/Q): Connector X1
Port 2 (C/Q): Connector X2
Port 3 (C/Q): Connector X3
Port 4 (C/Q): Connector X4
5 Actuator supply ground 2M
Port Class A (type A)*
,2/LQN
'HYLFH
;;
Port Class B (type B)
,2/LQN
'HYLFH
;;
* If you use the sockets for IO-Link devices with Port Class A, do not place any signals on pins 2 and 5.
The M12 connectors are designed as Port Class B according to IO-Link specification. Pins 2
and 5 contain an additional power supply.
49
Wiring
3.6 Pin assignment of connectors
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN