Siemens SIMATIC ET 200eco PN, Operating Instructions Manual

Page: 192 / 278

Technical specifications
Ambient temperature
positive negative
(0 °C to
-25 °C) negative
(-25 °C to
-40 °C)
U 0.1% 0.15% 0.3%
Operational limit (across the temperature range,
relative to output range)
I 0.15% 0.25% 0.4%
U 0.08% Basic error limit (operational limit at 25°C, relative
to output range)
I 0.1%
Ambient temperature
positive negative
U 0.001%/K 0.003%/K
Temperature error (relative to output range)
I 0.0025%/K 0.005%/K
Linearity error (relative to output range) ± 0.02%
Repeat accuracy (in steady-state condition at 25°C,
relative to output range) ±0.008%
U ±0.6 mVrms Output ripple (relative to output range, bandwidth
0 to 50 kHz
I ±0.4 nArms
Status, interrupts, diagnostics
Interrupts Yes
Diagnostics functions
• Group error/maintenance Red/yellow "SF/MT" LED
• Bus monitoring PROFINET IO Red "BF" LED
• Monitoring of supply voltage 1L+ Green "ON" LED
• Existing connection to network Green "P1 LK" and "P2 LK" LED; LED for PROFINET
IO infeed and loop-through
• Fault at analog output Red LED
• Diagnostic information can be read Yes
Monitoring for
• Supply voltage 1L+ Yes
• Sensor supply short-circuit Yes
• Short-circuit Yes; channel (voltage)
• Wire break Yes; channel (current)
• Thermal overload at output Yes; channel
Insulation
Insulation test voltage
• Ethernet interface 1500 V
rms
(IEEE802.3, Type Test)
• All other circuit elements 707 V DC (type test)
Electrical isolation
• Between 1L+ and 2L+ Yes
193
I/O device analog input/analog output
10.2 I/O device analog output
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN