Siemens SIMATIC ET 200eco PN, Operating Instructions Manual

Page: 97 / 278

Sinusoidal disturbance variables
The table below shows the electromagnetic compatibility of the ET 200eco PN distributed I/O
device with respect to sinusoidal disturbances.
HF radiation according to IEC 61000-4-3
Electromagnetic HF field
Amplitude modulated
HF coupling according to
IEC 61000-4-6
80 to 1000 MHz; 1.4 to 2 GHz 0.15 MHz to 80 MHz
10 V/m 80% AM (1 kHz) 10 V
rms
unmodulated
2 to 2.7 GHz 80 % AM (1 kHz)
1 V/m at 80 % AM (1 kHz) 150 Ω source impedance
Emission of radio interference
Interference emission of electromagnetic fields in accordance with EN 61000-4-6: (measured
at a distance of 10 m).
Frequency Noise emission
30 MHz to 230 MHz < 40 dB (µV/m)Q
230 MHz to 1000 MHz <47 dB (µV/m) Q
Shipping and storage conditions
The ET 200eco PN distributed I/O device surpasses the requirements according to IEC 61131-2
for transport and storage conditions. The following information applies to modules
transported or stored in their original packaging.
Type of condition Permissible range
Free fall ≤ 0.3 m
Temperature from -40 °C to +70 °C
Temperature change 20 K/h
Air pressure From 1140 hPa to 660 hPa
(corresponds with an altitude of -1000 m to
3500 m)
Relative humidity From 5% to 95%, without condensation
98
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
General technical data
8.2 EMC compatibility, shipping and storage conditions