Siemens SIMATIC ET 200eco PN, Operating Instructions Manual

Page: 188 / 278

Properties
• 4 outputs for voltage or current output
• Output ranges:
– ±10 V, resolution 15 bits + sign
– 1 to 5 V, resolution 15 bits
– 0 to 10 V, resolution 15 bits
– ±20 mA, resolution 15 bits + sign
– 4 to 20 mA, resolution 15 bits
– 0 to 20 mA, resolution 15 bits
• Supply voltage DC 24 V
• Dimensions 60 x 175 mm
• Diagnostics
– "Missing 1L+" supply voltage
– "Sensor supply short-circuit"
– "Wire break"
– "Short-circuit"
– "Overload"
• Parameterizable response to CPU/Master STOP
• Prioritized startup
• Media redundancy
NOTE
Incorrect intermediate values at the output are possible when supply voltage 1L+ is
switched on and off.
NOTE
The outputs are in voltage mode and supply a signal 0 V until the parameter assignment
becomes effective after switching on.
Pin assignment
You will find the pin assignment for the 4 AO U/I 4×M12 I/O device in the table below.
Table 10-8 Pin assignment for voltage and current for the 4 AO U/I 4×M12 I/O device
Assignment for U/I Pin
Socket X1 Socket X2 Socket X3 Socket X4
View of socket
(front view)
1 24 V actuator supply 1U
A
(derived from 1L+ non-switched)
Output signal 2
Q
0
+ Q
1
+ Q
2
+ Q
3
+
3 Actuator supply ground 1M
189
I/O device analog input/analog output
10.2 I/O device analog output
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN