Siemens SIMATIC ET 200eco PN, Operating Instructions Manual

Page: 164 / 278

Technical specifications
Interference suppression, error limits
Interference suppression for
f = n x (f1 ± 0.5%), (f1 = interference frequency) 46 dB
• Common-mode interference (interference
voltage < 5 V) 70 dB
• Series-mode interference (peak value of inter­
ference < Rated value of input range) 46 dB
Crosstalk between inputs < -85 dB
Ambient temperature
positive negative
(0 °C to
-25 °C) negative
(-25 °C to
-40 °C)
R, RTD 0.1% 0.15% 0.3%
Operational limit (across temperature range, relat­
ive to input range)
TC 0.2% 0.25% 0.4%
R, RTD 0.05% Basic error limit (operational limit at 25 °C, relative
to input range)
3
TC 0.1%
Ambient temperature
positive negative
R, RTD 0.0005%/K 0.001%/K
Temperature error (relative to input range)
TC 0.0035%/K 0.007%/K
Linearity error (relative to input range) ±0.01%
Repeat accuracy (in steady-state condition at 25°C,
relative to input range) ±0.008%
Operational limits (relative to internal temperature
sensor) ±3 °C
Basic error limits (relative to internal temperature
sensor) ±2 °C
Status, interrupts, diagnostics
Interrupts Yes
Diagnostics functions
• Group error/maintenance Red/yellow "SF/MT" LED
• Bus monitoring PROFINET IO Red "BF" LED
• Monitoring of supply voltage 1L+ Green "ON" LED
• Existing connection to bus Green "P1 LK" and "P2 LK" LED; LED for PROFINET IO
infeed and loop-through
• Analog input error Red LED
• Diagnostic information can be read Yes
Monitoring for
• Wire break Resistors and thermoresistors
• Underflow and overflow Yes
• Supply voltage 1L+ Yes
165
I/O device analog input/analog output
10.1 I/O device analog input
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN