manualshive.com logo in svg

Siemens SCALANCE W786-xPRO, Operating Instructions Manual

The Siemens SCALANCE W786-xPRO brings reliable and high-speed connectivity to industrial networks. To unleash its full potential, make sure to download the Operating Instructions Manual for a seamless setup and configuration process. This comprehensive manual is available for free download at manualshive.com, empowering you to maximize the capabilities of this exceptional product.

Share
Download
background image

 

Configuration / project engineering 

 

5.5 Security Wizard 

SCALANCE W786-xPRO 
Operating Instructions, Release 08/2007, C79000-G8976-C221-02 

87

 

 

 

Note 
Since no encryption is used for the SSID transfer, this function can only provide basic 

protection against unauthorized access. The use of an authentication method (for example 

WPA (RADIUS) or WPA-PSK if this is not possible) provides higher security. You must also 

expect that certain end devices may have problems with access to a hidden SSID. 

 

Enable 'Inter SSID communication' option for WLAN 1 

Selecting this option allows communication between WLAN clients registered at different 

SSIDs of an access point. 

 

Example 1 

A SCALANCE W786-3PRO was defined with different SSIDs. 

Example 2 

A SCALANCE W788-1PRO is used with multiple SSIDs. 

 

 

 

Note 
On a SCALANCE W78x-2/3xx, the Inter SSID Communication function must be enabled on 

all WLAN interfaces or on all VAPs to allow communication between the clients with different 

SSIDs. 

 

 

Note 
If VLANs are configured for the SSIDs, this setting can prevent communication between the 

SSIDs according to the VLAN rules. 

 

Enable 'Intracell communication' list box 

●

 

Intracell blocking 

This setting prevents WLAN client communication within an SSID. 

●

 

Ethernet blocking 

This setting prevents WLAN client communication over the Ethernet interface of the 

access point. 

●

 

Disabled 

This setting enables both WLAN client communication within an SSID as well as WLAN 

client communication over the Ethernet interface. 

Overview of the communication options 

To illustrate the situation, there is an overview of the effects of the "Inter SSID 

communication" and "Intracell communication" settings below. 

 

Summary of Contents for SCALANCE W786-xPRO



























































































































































































































































Reviews:

No comments

Related manuals for SCALANCE W786-xPRO

Homefibre OMA111WLAN-220 Installation Instructions preview
OMA111WLAN-220
Brand: Homefibre Pages: 2
Gemtek WX-5525G User Manual preview
WX-5525G
Brand: Gemtek Pages: 35
Systimax AirSPEED AP542 User Manual preview
AirSPEED AP542
Brand: Systimax Pages: 197
BEC MX-200A ODU Quick Start Manual preview
MX-200A ODU
Brand: BEC Pages: 18
Z-Com XG-580 PLUS User Manual preview
XG-580 PLUS
Brand: Z-Com Pages: 23
H3C WA4320H-EI Installation Manual preview
WA4320H-EI
Brand: H3C Pages: 19
TUYA TYLC4 User Manual preview
TYLC4
Brand: TUYA Pages: 13
TRENDnet TEW-740APBO User Manual preview
TEW-740APBO
Brand: TRENDnet Pages: 93
Cambium Networks cnPilot E410 Indoor Hardware Installation Manual preview
cnPilot E410 Indoor
Brand: Cambium Networks Pages: 52
Linksys WAP51AB - Instant Wireless - Access Point Specifications preview
WAP51AB - Instant Wireless - Access Point
Brand: Linksys Pages: 2
D-Link DAS-3248 Quick Installation Manual preview
DAS-3248
Brand: D-Link Pages: 20
D-Link DI-624M - Wireless 108G MIMO Router Quick Installation Manual preview
DI-624M - Wireless 108G MIMO Router
Brand: D-Link Pages: 12
D-Link DHP-1220AV Quick Installation Manual preview
DHP-1220AV
Brand: D-Link Pages: 36
D-Link DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router Quick Installation Manual preview
DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router
Brand: D-Link Pages: 22
D-Link DI-514 - Wireless Router Quick Installation Manual preview
DI-514 - Wireless Router
Brand: D-Link Pages: 12
D-Link DIR-412 Quick Installation Manual preview
DIR-412
Brand: D-Link Pages: 34
D-Link DIR-301 User Manual preview
DIR-301
Brand: D-Link Pages: 67
D-Link DAP-1250 Install Manual preview
DAP-1250
Brand: D-Link Pages: 12

Brands by name

Popular brands

Load more brands