Siemens SCALANCE W786-xPRO Operating Instructions Manual Download Page 231

Page: 231 / 250

SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02

231

Appendix

A.1

Private MIB variables of the SCALANCE W78x / W74x

Downloading the MIB of the SCALANCE W-700 using the Internet Explorer

Using the URL

http://<IP_address>/snScalanceW.mib

, you display the login window if you are not yet logged on. After you have logged on

successfully, you can access the private MIB of the SCALANCE W-700. To save this on your

PC, the source text view should be enabled.

OID

The private MIB variables of the SCALANCE W78x have the following object identifiers:

iso(1).org(3).dod(6).internet(1).private(4).

enterprises(1).ad(4196).adProductMibs(1).simaticNet(1).

iScalanceW(4)

Variables for access points and clients

The following table shows the private MIB variables available for access points and clients:

Name OID

Description

Number

objects

snDownload 1.3.6.1.4.1.4196.1.1.4.100.1.5

Download information and control variables

for image, configuration file, events table.

snNvLog

1.3.6.1.4.1.4196.1.1.4.100.1.6

Log for events.

snTrapInfo 1.3.6.1.4.1.4196.1.1.4.100.1.7 Information

traps.

snGen 1.3.6.1.4.1.4196.1.1.4.100.1.8

General information, not conforming with

MIB-2.

snTcpip 1.3.6.1.4.1.4196.1.1.4.100.1.10

IP address, Subnet Mask, Default Gateway,

DHCP Status

…

snScalanceWCommon 1.3.6.1.4.1.4196.1.1.4.100.2.1

SCALANCE W-700 - specific settings.

snScalanceWFilter 1.3.6.1.4.1.4196.1.1.4.100.2.4 Protocol

filters and storm threshold settings 18

snScalanceWStats 1.3.6.1.4.1.4196.1.1.4.100.2.5 Information on WLAN 1 and WLAN 2

interfaces.

snScalanceWDevices 1.3.6.1.4.1.4196.1.1.4.100.2.6

AP mode: List and information on all clients

currently "associated" or connected.
Client mode: List of devices with which the

client is currently connected.

Summary of Contents for SCALANCE W786-xPRO



























































































































































































































































Search results

Summary of Contents for SCALANCE W786-xPRO

Reviews:

Related manuals for SCALANCE W786-xPRO

Brands by name

Popular brands

Siemens SCALANCE W786-xPRO, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE W786-xPRO

Reviews:

Related manuals for SCALANCE W786-xPRO

Brands by name

Popular brands