Configuration / project engineering
5.6 Configuration with Web Based Management
SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
105
Syslog Configuration with the SCALANCE W-700
The parameters used for the Syslog protocol are displayed and set in the System -> Syslog
menu:
The meaning of the parameters is as follows:
Syslog Server input box
The server address decides the IP address to which the Syslog messages are sent. If no IP
address is entered in this box, no Syslog messages are sent. If the Syslog server is not in
the same network as the SCALANCE W, an automatic attempt is made to establish a
connection over the default gateway.
log table check box
This check box decides whether all entries made in the log table are also sent as Syslog
messages.
auth log check box
This check box decides whether all entries made in the authentication log are also sent as
Syslog messages.
