Appendix
A.1 Private MIB variables of the SCALANCE W78x / W74x
SCALANCE W786-xPRO
232
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
Name OID
Description
Number
of
objects
snScalanceWScan 1.3.6.1.4.1.4196.1.1.4.100.2.7 Client
mode: List of reachable WLANs and
information whether the clients can connect
to them.
11
snScalanceWAccess 1.3.6.1.4.1.4196.1.1.4.100.2.9
List of IP addresses that can access the
management interface.
5
Variables available only for access points
Name OID
Description
Number
of
objects
snScalanceWAcl 1.3.6.1.4.1.4196.1.1.4.100.2.8
Information and settings for the Access
Control Lists.
9
snScalanceWVirtualAp 1.3.6.1.4.1.4196.1.1.4.100.2.10 Information on the currently configured
virtual APs.
17
Traps for access points and clients
Name Specific
index
Variables Description
snScalanceWPowerLineD
own
32
snScalanceWChangedPowerLine - The power
line where the last power down occurred. 1-
M12, 2-Ethernet Power
This is generated if there is a
power down on M12 or the
Ethernet power connector.
snScalanceWPowerLineU
p
32
snScalanceWChangedPowerLine - The power
line where the last power up occurred. 1-M12,
2-Ethernet Power
This is generated if there is a
power up on M12 or the Ethernet
power connector.
snScalanceWFault 41 snScalanceWFaultValue
-
Fault value:
0 = no fault,
bit 0 = power M12 is off,
bit 1 = link down,
bit 2 = internal error,
bit 23 = Link Check error,
bit 24 = IP Alive broken,
bit 25 = power ethernet is off,
bit 26 = Cold/warm start,
bit 27 = C-PLUG error,
bit 28 = iQoS error,
bit 29 = Redundancy error"
This is generated if the
snScalanceWFaultValue variable
is changed.
The bit is set to "1" according to
the event that has occurred.
snScalanceWIQOS
51
snScalanceWIQOSValue - Description of the
last snScalanceWIQOS trap
snScalanceWLinkCheckO
ff
81
snScalanceWLinkCheckValue - Description of
the last snScalanceWLinkCheckOff Trap
This is generated if a timeout
occurs with a client monitored
with Link Check.
