Configuration / project engineering
5.7 Configuration with the Command Line Interface
SCALANCE W786-xPRO
188
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
Comment
1 SCALANCE
W786-
1PRO
2 SCALANCE
W786-
2PRO
3 SCALANCE
W786-
3PRO
4 IWLAN/PB
Link
See also
C-PLUG menu command (Page 108)
5.7.3
The CLI
\
INTERFACES menu
5.7.3.1
CLI
\
INTERFACES
\
ETHERNET menu command
Settings for WLAN and Ethernet
With the commands of this menu, you configure the Ethernet interface.
CLI
\
INTERFACES
\
ETHERNET>
Comment
Command Description
IWLAN/
PB LINK
W744 W746 W747 W78x
W78x
RR
ᅳ
✔
✔
✔
✔
✔
Specifies the transmission speed
and mode of the Ethernet
interface:
O
Automatic selection by
the device
100F
100 Mbps full duplex
100H
100 Mbps half duplex
10F
10 Mbps full duplex
ethspeed
[A|100F|100H|10F|10H]
10H
10 Mbps half duplex
This command is available only on devices with an RJ-
45 connector.
ᅳ
✔
✔
✔
✔
✔
Specifies whether or not a
crossover cable is used on the
Ethernet interface:
D
Standard cable not
crossover
ethcross [E|D]
E
Crossover cable
This command is possible only when the transmission
speed is not set automatically by the device
("etherspeed" command with parameter "A").
This command is available only on devices with an RJ-
45 connector.