Siemens SCALANCE W786-xPRO Operating Instructions Manual Download Page 179

Page: 179 / 250

Configuration / project engineering

5.7 Configuration with the Command Line Interface

SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02

179

Comment
This command is available only with the following

models:

•

SCALANCE W788-1RR

•

SCALANCE W788-2RR

•

SCALANCE W784-1RR

setec CT <E|D> <E|D>

<E|D> <E|D>

Reaction when the specified

update time in iPCF mode with

PNIO support cannot be kept to.

ᅳ

✔

If the connection status changes, an event is triggered.

If the connection no longer exists, the error state is

triggered and the error LED is lit.

setec IS <E|D> <E|D>

<E|D> <E|D>

Reaction to a change in the

connection status on a client for

which the IP-alive monitoring is

activated.

ᅳ

✔

setec LI <E|D> <E|D>

<E|D> <E|D>

Reaction when establishing a

connection monitored with the

Link Check

function.

ᅳ

✔

setec IQ <E|D> <E|D>

<E|D> <E|D>

Reaction to a change in the

iQoS status.

ᅳ

✔

setec RD <E|D> <E|D>

<E|D> <E|D>

Reaction to a change in the

redundancy event status.

ᅳ

✔

setec CA <E|D> <E|D>

<E|D>

Reaction when a client logs on.

ᅳ

✔

setec CD <E|D> <E|D>

<E|D>

Reaction when a client logs off.

ᅳ

✔

setec FR <E|D> <E|D>

<E|D>

Reaction to the forced roaming

on IP down function.

ᅳ

✔

setec ST <E|D> <E|D>

<E|D>

Reaction to a topology change

by (rapid) spanning tree.

ᅳ

✔

setec WD <E|D> <E|D>

<E|D>

Reaction to the connection

status of WDS.

ᅳ

✔

setec CP <E|D> <E|D>

<E|D>

Reaction when the cycle time in

iPCF mode with PNIO support

could not be kept to.

ᅳ

✔

Commands available only for the IWLAN/PB LINK (not for access points and clients):

Comment

Command Description

IWLAN/

PB LINK

W744 W746 W747 W78x

W78x

setec CW <E|D> <E|D>

<E|D>

Reactions to a IWLAN/PB

LINK restart

✔

ᅳ

setec P1 <E|D> <E|D>

<E|D>

Reaction to a change of power

supply over power connection

✔

ᅳ

setec P2 <E|D> <E|D>

<E|D>

Reaction to a change of power

supply over power connection

✔

ᅳ

setec FC <E|D> <E|D>

Reaction to a change in the

error status.

✔

ᅳ

Summary of Contents for SCALANCE W786-xPRO



























































































































































































































































Search results

Summary of Contents for SCALANCE W786-xPRO

Reviews:

Related manuals for SCALANCE W786-xPRO

Brands by name

Popular brands

Siemens SCALANCE W786-xPRO, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE W786-xPRO

Reviews:

Related manuals for SCALANCE W786-xPRO

Brands by name

Popular brands