LITHOSTAR Multiline
RXL2-120.812.01
Page 8 of 14
Siemens AG
System
Rev. 02
10.04
CS PS 24
Medical Solutions
2 - 8
System Installation
•
At this point you have to route the SONOLINE cables (see chapter 3, page 18 or
chapter 4, page 22) if the ultrasound option is being installed.
•
Insert the two-part base frame cover and mount it in place using four paneling screws for
each part (
/Fig. 12).
•
Install the kick plates on both table legs and fasten them together (Fig. 13).
•
Attach the paneling to the underside of the shock head support (A/Fig.14).
•
In the front section of the base frame (B/Fig. 14), use black plastic plugs to seal the two
holes for mounting the transport carriage.
Fig. 12
Fig. 13
A
B
Fig. 14
