System Installation
2 - 7
Siemens AG
RXL2-120.812.01
Page 7 of 14
LITHOSTAR Multiline
Medical Solutions
Rev. 02
10.04
CS PS 24
System
Installing the Covers
2
For all visible surfaces, special paneling screws with 2.5 Allen sockets have been pro-
vided.
•
The required screws and washers are already counted out and packed in plastic bags.
•
Secure the two lateral strips on the unit base frame with three paneling screws for each
(
/Fig. 10).
•
Install the rear metal roll-down sash in the unit base frame on the left and the right
(
/Fig. 11); for this, the mounting brackets must be installed on the inside of the frame.
•
Attach the cover (K/Fig. 11) for the cable routing using two paneling screws.
Before installing the covers, connect each metal cover to ground;
the connections are provided in the unit and on the cover panels
themselves.
K
Fig. 10
Fig. 11
CAUTION
