Siemens Gigaset C1 User Manual Download Page 81

Page: 81 / 300

Operating more than one handset

S1_SL1 / englisch / A31008-M373-B103-1-7619 / several_handsets.fm / 08.06.2004

Activating/deactivating the Walk and Talk mode

If, when you are in Walk and Talk mode, you press the talk key

or the handsfree

key

, the call will go to all the handsets that are in Walk and Talk mode. The connec-

tion is made with the first handset to answer the Walk and Talk call.

Using a handset in Walk and Talk mode as a room monitor

You can also use the room monitor function in Walk and Talk mode.

The room monitor will call all the handsets that are in the Walk and Talk mode.

Press the display key

Off

on the room monitor handset to deactivate the room monitor.

The handset returns to the normal Walk and Talk mode.

Open the menu.

s é

Select the menu item and confirm.

Walk and Talk

Select the menu item and confirm.

Deactivate the Walk and Talk mode:

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

Off

Press the display key.

◆

"Selecting the ringer" (page 105), "Activating/deactivating ringer or

advisory tones" (page 109) and "Activating/deactivating keypad lock"

(page 10) are available in Walk and Talk mode.

◆

To open the menu, press the display key

◆

The Walk and Talk mode is retained even when you switch your

handset off and back on.

Press the display key.

s é

Select the menu item and confirm.

Room Monitor

Select the menu item and confirm.

s r

Jump to the line

Room M.:

and activate the room

monitor.

s r

If necessary, scroll to the

Level:

line and set the sen-

sitivity for the noise level (

Low

High

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

Save

Press the display key. The room monitor function is

now activated.

Always check the settings of the room monitor before you leave

home, e.g. sensitivity and phone line.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands