Siemens Gigaset C1 User Manual Download Page 263

Page: 263 / 300

System settings

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

Assigning an MSN a ringer melody

Each new receive MSN you set up is automatically given its own ringer melody, which

you can change individually. For a receive MSN you can:
Select one of the available ringer melodies. This means that all handsets will use this

ringer melody to indicate an incoming call to a receive MSN.

Instead of ringer melodies 1 – 10 you can also assign the "device ringer

tone" to an MSN. Then those handsets assigned to the receive MSN will

ring with the ringer melody that is set for the handset for external calls

(page 90).

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 78).

ISDN settings

Select the menu item and confirm.

Set up MSN

Select the menu item and confirm.

Select MSN, e. g.

MSN1: Anna

MENU

Open the submenu.

Ringer Melody: 5

Select melody and confirm, e. g.

Ringer Melody: 5

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands